20 Liter Blow Moulding Machine
Home › Products › Packaging Machine › 20 Liter Blow Moulding Machine
20 Liter Blow Moulding Machine
MOQ : 10 Pieces
Product Details
Mould Clamping Cylinder
30 Ton 350 Stroke
Sealing Nozzle
Inner Type For 12ltr Jar Dispenser 120mm Neck
Capacity :
- Production Range 5 Ltr Capacity 250 - 300 Jar Per Hour
- 10 Ltr - 15 Ltr 150 To 160 Jars Per Hour
- 20 Ltr Capacity 110 - 120 Jph
- (Product Weight 675 To 710 Grms)
- 20 Ltr Capacity 140 - 150 Jph
- (Product Weight 350 Grms For 1 Way Disposable Jar)
- (Depending On Molds And Preform Quality)
Tech. Spec. :
- Infrared Conveyorised Preheating System - 950mm Two Modules 3980mm Long (3 Ph)
- Fully Pneumatic Conveyor With Online Inner Heating System
- Mould Clamping Cylinder 30 Ton 350 Stroke
- Plc Base Touch Screen Type Controller Model Ultra Cpu 09
- Preform Indexing Bonfiglioli Gear Motor With Ac Variable Drive
- Preform Holder - 02 Sets (Bubble Top & Dispenser 120mm Neck)
- High Pressure Seal Cly. Dia 125 X 60mm Strock - 01 No.
- Blowing Valve Parker Lucifier
- Poppet Type Combine Low Pressure & High Pressure Blowing Manifolds
- Sealing Nozzel Inner Type For Bubble Top Jar - 1 No.
- Sealing Nozzel Inner Type For 12ltr Jar Dispenser 120mm Neck
- Stretch Rod - Dia : 25mm With Gripper For Single Cavity Jar.
- Combination Sealing & Stretching Attachment 25mm Stretch Dia With Gripper
- To Maintain Preform Uniform Preheating Provide High Efficiency Fan Behind The Heating Module.
- Set Of Tools And Operation Manual For Hydro Pneumatic Andmicroprocessor
Power Consumption
MACHINE |
KW |
1000 W Heater (1kw)
Total number of Heater 16 Nos X 2 Modules |
31 |
Perform Index Heater |
1 |
Perform Index Motor |
0.37 |
Total Power |
33.37 |
AUXILLARIES |
KW |
Compressor 40 HP (0-40 Bar) For High Pressure Blowing - 1 No |
30 |
Chiller 3 Tr |
3 |
Cooling Tower 20 Tr With 1 Hp Mono Water Pump |
1.5 |
Refrigerated Air Dryer 40 Cfm / 40 Bar With Activated Carbon Filter And Fine Filter 0.01 Micron 1 No |
0.6 |
Total |
35.1 |
Pieces